Environmentally-friendly. The preferred fire suppression system for vital facilities that can't afford fire-related business interruption of process controls, automated industrial operations, robotics, etc. Active on fire, but inert on people; non-toxic when used per NFPA Standard 2001. Safe, no-residue protection for Class A, B and C fires. Every Kidde system checked for design accuracy. Designed for maximum protection with minimum hardware; less space, lower cost. UL Listed and Factory Mutual approved.
Reduces risk of downtime and helps maintain business continuity in the event of a fire.
Clean, leaving no residue. Safe for discharge into occupied spaces.
Design concentrations for 95% of its applications fall well below NOAEL levels.
Cost effective engineered system, providing maximum protection.
Proven Kidde Reliability - tested and approved all of Kidde's various detection and control options.
Sustainable technology providing an environmentally-friendly solution.
Technical Specifications: FM-200 agent actively attacks the fire to extinguish flames rapidly
Engineered system providing a fast acting 10 second discharge
Offers fully developed, flexible design limits to fit any application environment
Design concentrations range from 6.25% to 7.0% for Class A and Class C hazards
Easy to design using Engineered Series software
UL Canada (ULC)
Factory Mutual Approved
The Kidde FE-13 Suppression System is designed for protection of applications in low temperature environments and high-ceiling structures or where a high concentration of fire suppression agent is required to inert the protected application against fire. Uses clean, fast, people-safe FE-13 gaseous agent that works by absorbing heat from the fire. System includes detectors, a control unit, agent storage cylinders, piping and discharge nozzles.
Listed and approved for use by the U.S. EPA
Ideal for inerting environments
Tested and approved with all of Kidde's various detection and control options
Flexible design to fit your application
Technical Specification: Provides its own source of propellant with a high vapor pressure
Extinguishes fire both physically and chemically
Very low boiling point to allow a discharge to gas at low temperatures (140° F)
Typical use concentration at 18% - NOAEL at 30% - High Safety Margin
Approved for hazards with 25 foot ceiling heights
FM (Modular only)
• Novec 1230
Kidde Engineered Fire Suppression System Designed for Use with 3M™ Novec™ 1230 Fire Protection Fluid is engineered to provide clean, fast, people-safe protection for applications requiring a “green” solution to fire suppression. The system includes detectors, a control unit, agent storage cylinders, piping and discharge nozzles. The system is computer calculated to provide system discharge within 10 seconds.
Provides a high safety margin with a 4.2% use concentration and a 10% NOAEL level.
Listed for protection against Class A, Class B and Class C fires.
Is a fluid at atmospheric pressure and can be gravity fed for easy recharge.
Extinguishes fire through heat absorption and not oxygen reduction.
Technical Specifications: Novec™ 1230 Fluid presents distinct environmental benefits, including a zero Ozone Depletion Potential (ODP) and the lowest Global Warming Potential (GWP) of a chemical based clean agent, key to satisfying demands of environmentally sensitive markets and end-users.
The Engineered System — allows design flexibility using our Novec™ 1230 Fire Protection Fluid system design software.
Provides a high safety margin with a 4.2% use concentration and a 10% NOAEL and > 10% LOAEL level.
Listed for hazard temperatures between 0°F and 132°F.
Factory Mutual Approved
The Argonite fire suppression system uses an inert gas that offers effective fire protection with zero environmental impact. It is a simple blend of 50% Argon gas and 50% Nitrogen gas with a density similar to that of air. Both Argon and Nitrogen are clean, natural gases that are readily available throughout the world. Argonite is safe and effective for use on many applications—it is well suited for leaky enclosures such as flight simulators, substations, and control rooms and for applications with multiple hazards.
Argonite has zero Ozone Depletion Potential (ODP) and zero Global Warming Potential (GWP)
No secondary products of combustion when exposed to flame
Capable of remote cylinder location from hazard
Technical Specifications: Cylinder pressure at 2900 PSIG
Can be used to extinguish Class A, Class B or Class C fires
Listed and Approved for use with selector valves
Protection for enclosures with temperatures from -20°F to 130°F
ULC Listed (Canada)
Factory Mutual Approved
• Carbon Dioxide
The Kidde Carbon Dioxide Fire Suppression System is an engineered system available in three application configurations: total flooding (for unoccupied areas), local application or hand-hose line. System includes detectors, a control unit, agent storage cylinders, piping and discharge nozzles. Gaseous carbon dioxide rapidly suppresses fire by a combination of cooling and oxygen displacement. Discharge duration and agent flow rates are customized for the individual application.
Proven quality and reliability with the Kidde brand.
Tested and approved with all of Kidde's various detection and control options.
An inexpensive and easy-to-access agent when refill is necessary.
Wide ranges of proven safe, hazard protection.
Technical Specifications: Reduces the oxygen content of the atmosphere to a point where combustion becomes impossible.
Hardware to accommodate any application and system type